LIFTING UP YOUR BUSINESS SINCE 1988

Lifting Beams are used in low headroom applications, and structurally are able to handle the load throughout the beam spread. Beams allow multiple point pick up of the load for balance or support purposes. Beams can be used from two hoists to increase lift capacity.

Spreader Beams have top rigging and direct most of load stress through the rigging directly to the hooks. Structurally spreader beams spread load and are not designed to equally handle load stress at all points across beam spread. The greater distance between the hoist and the load (due to top rigging) gives these beams greater stability.

Caldwell has multiple roll lifters to make roll handling simplified and efficient. Beams, Two Sided Grabs (manual or motorized), Tongs, C Hooks, Pallet Lifters and Positioners are available.

Caldwell has multiple designs to lift, manipulate, and reposition coils either with the coil "eye" in the vertical or horizontal position. Economical "C" Hooks require aisle space to equal the length of the arm. Two sided lifters require aisle space to equal the length of the foot. Motorized units are also available for efficient handling of a large volume of coils. Mill Duty designs available.

Sheet Lifters are versatile in the handling of bundles of sheets or other loads stacked horizontally. Efficient one person operation. Efficient worm gear drive with hand wheel, chain wheel or motorized leg adjustments.

Pallet Lifters convert overhead cranes into fork lift trucks, allowing pallets to be moved throughout a plant where fork lift trucks cannot access. Fixed and adjustable fork models are available.

Rotating Crane Hooks allow independent and precise positioning of a load with a full 360 degree' rotation. These units are motorized. Available with a built in load scale and read-out option.

Lifting mangets provide an efficient way to handle steel in various sizes and shapes including plate, bar and tube. Permanent or electric model magnets can be used in many manufacturing environments and allow greater flexibility in the handling and storage of material.

Narrow application vacuum lifters are single pad, and multi-pad inline design for handling small squares or narrow material.  There are 108 standard configurations listed with special configurations available to fit almost any application.

Wide application vacuum lifters are multi-pad units with two, three or four crossarms will lift long, wide and/or thin material quickly and easily.  There are 343 standard configurations listed with special configurations available.

Caldwell's specialty lifters include upending units for both glass and non-glass applications.  Custom designed side grab manipulations, adjustable size lifters, remote controlled, and high temperature applications.

Mechanical vacuum lifters are an economical solution for a wide range of applications where bringing power to the lifter is not practical or feasible.  Over 30 different configurations are available.

Caldwell® Posi-Turner® Posi-Lite® Systems are designed for the lifting, suspension, rotation, and positioning of objects.  An operator uses a hand held pendant or remote control to lift, level and rotate the object without re-rigging.  They are available to handle loads from 500 pounds to 1,500 pounds.  Heavy Duty Posi-Turner Systems are also available with capacities up to 150 tons.

Wood's Powr-Grip has provided innovative equipment which uses vacuum to lift, hold, and position nonporous materials, including glass, plastics, engine valves, sheet metal, stone slabs, and appliances. They offer a broad range of hand-held vacuum cups, vacuum mounting cups and below-the-hook vacuum lifters to make materials handling easier.  Whether you need AC, DC, Air, or manually powered equipment, there is a Powr-Grip solution to lift, turn, and rotate your material.  Ideal for stone, glass, or general materials with nonporous surfaces.

Columbus McKinnon's Camlock Clamps line features a wire array of lifting clamps.  Included are plate clamps, soft-grip clamps, girder clamps, pinching clamps, turning clamps, and beam clamps.

Crane forks are ideal for handling palletized loads in areas such as loading docks, crowded or unpaved storage areas, and railroad yards.  They are also used frequently to load barges, gondolas, and open top trucks.  Available capacities range from 1/4 Ton to 10 Tons.

All Cady crane forks are counter balanced to hang level when empty and to increase the rate of handling.  Counterweight balances the lifter structure only, not the load.  The load is centered under the lifting bail for a level lift.  All crane forks are load tested and a test certificate is supplied with each unit.

C-Hooks are available in a variety of styles with capacities ranging from 5 to 50 Tons.  Compact C-Hooks are rugged , yet lightweight for easy handling.  The polished, large radius inside corners of the compact C-Hooks minimize stress concentration in these critical areas.  These inside corners are positioned to avoid contact with coil edges, thus deducing coil damage.  Additionally, the curved saddle on the lower arm reduced wear on the coil.

In addition to the popular Compact C-Hooks, the Caddy Lifters line also includes Close Stacking C-Hooks and Ship Loaders.  Close Stacking C-Hooks contain a short upper arm that permits handling a large range of coil sized flush against a vertical surface.  This arm also allows the user to handle all coils in a range without interfering with adjacent coils during movement.  Ship Loaders are designed for use with slings to handle two coils simultaneously.  Hooks are easily seperated for insertion into coils.

Lifting beams and spreaders are available in a wide range of capacities and styles.  Beams are available in fixed or adjustable styles and may also be designed with special hook or shakle configurations.  Low headroom beams are offered with either fixed or movable hooks, and can also be developed for three point lifts.

Cady Lifters Telescoping Sheet Lifters for Low Headroom, Low Maintenance Sheet Handling handle sheet bundle, plate, wallboard and plywood.  The basic structural configuration can be modified to handle unit loads such as palletized coils, crates, and tote boxes. The telescoping design uses very little headroom and saves aisle space. A self-locking worm gear drive prevents horizontal forces on the supporting legs from opening the lifter. The unique Cady design provides a rugged yet compact and lightweight lifter that is easy to handle. Each unit has been load tested for safety.

We have a variety of rigging hooks & rings available including forged or machined hoisting rings, available in standard or metric sizes.  Also available are swiveling  rings, tapered eye nuts, shoulder eye bolts, and rigging hooks.

We supply vertical lifting clamps from Safety Clamp that are designed for the vertical transfer of material.  "Locking" and "non-locking" clamps are available.  Non-locking clamps are to be used for the vertical transfer of material only while the locking style clamps may also be used to lift from horozontal to vertical.  All clamps feature wide jaw openings, high strength shock resistant steel, and protection of working parts inside clamp body. 

We supply horozontal lifting clamps from Safety Clamp which are designed for the lifting and transfering of material in the horozontal position.  They are available with locking mechanisms to help secure the clamp to the material and facilitate easier loading and unloading.  They are used in pairs, sets of pairs, or in tripod arrangement.  All clamps are made with high strength shock resistant steel and designed with all working parts inside the body for protection and longer life. 

We supply wide variety of lifting clamps from J.C. Renfro & Sons which are designed for the lifting and transfering of material.  Clamps are available for material including plate, fabricated steel, structural shapes, pipe, and steel drums.  There are vertical and horozontal clamps, locking or non-locking, and a wide variety of capacities available.  Please contact our knowledgeable sales engineers for more information.